Micromax Canvas A1 Official Firmware (AndroidOne)

Download Required

Firmware Click here

Flashing Tool Click Here

USB Driver Click Here

Follow the steps carefully

• Firstly Download and Install USB Drivers in your PC from the download Section Below.

• Now Download Main ROM Zip and SP Flash Tools.

• After downloading extract them into a Separate Folder into your PC. (Turn off Your Anti-Virus During The Process )

•  Now “Switch Off” You Canvas A1, Remove Battery and Reinsert It to ensure that it’s Properly Switched Off.

• Next Open SP-Flash Tools from the Same Extracted Folder.

• Now click Scatter Loading & Select the ‘MTTK65XX_Scatter.txt‘From the Directory where you extracted the Main ROM.

• Hit the Download button and SP Flash Tools will start searching for your device.

•  Now connect your device with a USB Cable in the switch off mode.

• Your device will be detected by SP Flash Tools and Upgrade Process will start.

• The process will complete in 3-4 minutes and then a success popup will appear, now disconnect your phone reinsert its battery and power it on.

• First booting takes 10 Minutes for getting device ready